background image

In

troduction

3

INTRODUCTION

Thank you for purchasing a RadioShack 2.4 GHz 
Cordless Telephone with Answering System. Your 
telephone provides excellent clarity and range and 
a digital answering system into one space-saving 
device. The 2.4 GHz band provides superior audio 
quality and extended range.

The digital answering system provides clear reliable 
messaging with call screening, day/time stamp, call 
counter, remote access and instant skip or replay 
messaging.

IMPORTANT 

INFORMATION

This telephone has been tested and found to 
comply with all applicable UL and FCC standards. 

!

FCC STATEMENT

Your telephone compiles with Part 68 of the FCC 
Rules.Upon request, you must provide the phone’s 
FCC registration number and REN to your phone 
company. These numbers are on the base unit. 

Your phone is not intended to be used with party-
line systems. Connection to party line service is 
subject to state tariffs. Contact the state public utility 
commission, public service commission, or 
corporation commission for information. 

Ô 

 

The lightning symbol is intended to alert you to 
the presence of uninsulated dangerous voltage 
within this product’s enclosure that might be of 
sufficient magnitude to constitute a risk of 
electric shock. Do not open the product’s case.

The exclamation symbol is intended to 
inform you that important operating and 
maintenance instructions are included in 
the literature accompanying this product.

!

WARNING:

 To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

.

CAUTION

.

CAUTION: 

TO REDUCE THE

 

RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER OR BACK. NO 

USER-SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

!

!

 IMPORTANT 

!

• When AC power is lost, 

the phone loses the 
digital security code 
connection between the 
base and the handset.
When power is restored, 
put the handset on the 
base briefly to restore 
this connection so you 
can use the handset.

• Your phone operates on 

standard radio 
frequencies as allocated 
by the FCC.

• It is possible for other 

radio units operating 
nearby on similar 
frequencies to 
unintentionally intercept 
your conversation or 
cause interference. This 
possible lack of privacy 
can occur with any 
cordless phone.

Ô

 NOTE 

Ô

 

You must not connect your 
telephone to:

• coin-operated systems
• most electronic key 

phone systems

43-3856.FM  Page 3  Saturday, February 28, 2004  6:45 PM

Summary of Contents for 43-3856





































Reviews: