19
Entering a Pause
In some telephone systems, you must
dial an access code (
9
, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you must also store a
pause after the access code to allow the
outside line time to connect. To do so,
press
PAUSE
. Each press enters a 2-sec-
ond pause. For a longer pause, press
PAUSE
additional times.
Dialing a Memory Number
To dial a number stored in memory, lift
the handset or press
TALK
. The TALK/
BATT indicator lights.
When you hear a dial tone, simply press
MEM
and enter the memory location
number for the number you want to dial.
Or, to dial a number stored in the memo-
ry location 1, 2, or 3, just press
M1
,
M2
, or
M3
. You need not press
TALK
when you
use these buttons.
Note: If you select an empty memory lo-
cation, the phone beeps 5 times. Try
again.
Chain-Dialing Service
Numbers
For quick recall of numbers for special
services (such as alternate long dis-
tance or bank by phone), store each
group of numbers in its own memory lo-
cation.
To use the stored special service infor-
mation, dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEM
and the number for
the location where the additional infor-
mation is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
USING A HEADSET
You can talk with hands-free conve-
nience using an optional headset that
has a
3
/
32
-inch (2.5-mm) plug. Contact
your local RadioShack store for a suit-
able headset.
PAUSE
43-725.fm Page 19 Tuesday, February 23, 1999 2:47 PM
