Need help? Call 1-800-950-7044!
16
Note: If you normally press
ENTER
after entering
a channel number, you must also include
ENTER
in your sequence.
4. To store the sequence, press and hold down
SET
UP
until the red indicator light blinks twice.
Whenever you press the selected sequence key (
AU-
DIO SEQ
or
VIDEO SEQ
), your system’s remote control
sends the sequence of commands you entered.
To erase a sequence, press the device key, then hold
SET UP
until the red indicator light blinks twice. Then
press
9 9 5
and the key to which the sequence is as-
signed (
AUDIO SEQ
or
VIDEO SEQ
). Press
SET UP
until
the red indicator blinks twice again. The sequence is
erased.
Punch-Through
The punch-through feature lets you alternately control
two different devices without pressing the device keys
for each one. Here’s how it works.
The 6 in 1 RF Remote Control System’s remote control
keys are not all used by every device. For example, a
TV is often the only device that uses
VOLUME
. When
you press
TV
, then press
VCR
, the functions of any keys
not used by the VCR retain their TV functions. If your
cable box or VCR has a volume control, you can turn
off the punch-through feature to allow your cable con-
verter or VCR to control the volume. If you want to con-
trol volume through your cable converter, you must be
in the cable mode. If you want to control the volume
through your VCR, you must be in the VCR mode.
For example, to turn off punch-through, with the remote
in the cable mode, press and hold
SET UP
until the red
indicator blinks twice. Then press
9 9 3 CBL
. When the
indictor blinks twice a second time, volume is controlled
through your cable box.
To turn on punch-through for the TV, press
SET UP 9
9 3 TV
. When the indicator blinks twice a second time,
the punch-through feature has been turned back on.
15-1919.fm Page 16 Monday, July 19, 1999 12:34 PM
