Need help? Call 1-800-950-7044!
18
PLUG ’N POWER
The Plug ’n Power feature lets you use the system to
control lamps and appliances with Plug ’n Power mod-
ules, available at your local Radio Shack store.
Follow these steps to control Plug ’n Power modules
with the system’s remote control and RF command
console.
1. Set the house code dial on top of your RF com-
mand console to the same letter as your Plug ’n
Power modules.
2. Set the bank switch on the RF command console
for the group of modules you want to control (
1-4
or
5-8
). With the switch in the
1-4
position, you can
control module numbers 1, 2, 3, and 4. With the
switch in the
5-8
position, you can control modules
5, 6, 7, and 8 .
3. Press
Plug ’n Power
on the system’s remote con-
trol.
15-1919.fm Page 18 Monday, July 19, 1999 12:34 PM
