11
Replace Battery
Your watch comes with one CR2016 lithium
battery installed. When the display dims or the
watch stops operating properly, replace the
battery.
1.
Use a Phillips jeweler’s
screwdriver to remove the
screws from the back panel.
2.
Remove the back panel.
3.
Remove the battery holder
by loosening two screws.
4.
Remove the old battery and
install a new battery with the
positive (+) side up.
5.
Replace the battery holder
with the four legs facing
downward and secure it with
screws.
6.
If necessary, re-insert the black
rubber ring making sure it’s the
right way up (with the longer
straight edge downward) if the
ring has moved out of position.
Reset hole