Need help? Call 1-800-763-9232
6
QUICK SETUP
The steps in this section tell you how to quickly set up
the 7-in-One to operate all of your devices.
To set up devices individually, or add a device after you
have set up the 7-in-One, see the appropriate section
under “Setting Up the Remote.”
Note: For the best operation, you should be within 15
feet of the device you want to control.
Follow these steps for quick setup.
1. Turn on all of the devices you are setting up.
2. Press
TV
.
3. Hold down
SETUP
until
TIMED
SEQ
appears.
4. Press
MENU
.
CODE
SETUP
appears.
5. Press
SELECT
.
DEV
SET
UP
appears.
6. Press
SELECT
again.
TV
appears.
7. Enter the first three-digit TV code listed for your
TV’s brand in “Setup Codes for TVs” on Page 12,
then press
SELECT
.
8. Point the remote at your TV and press
POWER
.
Your TV should turn off. If it does not, enter the next
code from the list and press
SELECT
then
POWER
again. When your TV turns off, press
VCR
.
VCR
appears.
9. Enter the first three-digit VCR code listed for your
VCR’s brand in “Setup Codes for VCRs” on
Page 16 or “Setup Codes for TV/VCR Combos” on
Page 19, then press
SELECT
.
15-1935.fm Page 6 Thursday, December 31, 1998 11:37 AM
