E-105
Disk Drive Error Messages (WK-3500 Only)
Display Message
Cause
Action
Err ReadOnly
Err Format
Err Disk R/W
Err DiskFull
Err Mem Full
Err Not SMF0
Err No Disk
Err No File
Err Protect
Err Convert
Err WrongDat
Err Name
Attempt to save a file using the same name as
an existing file that is read only.
1. The format of the diskette is not compatible
with this keyboard.
2. The diskette is not formatted.
3. The diskette is damaged.
The diskette is damaged.
The diskette is full.
Keyboard memory became full while
importing data from diskette.
The file you are reading is not an SMF 0
format file.
1. The diskette is not loaded in the drive
correctly.
2. No diskette is loaded in the drive.
The keyboard cannot find any file it can read
on the diskette.
The diskette is write protected.
There is not enough memory to save data
produced by converting song data from SONG
format to SMF format.
The file you are reading is a wrong format file.
The data on the diskette is corrupted.
A file with the same name as the one you are
trying to use already exists on the floppy diskette.
Save the new file to a different diskette or use
another name.
1. Change to a diskette that has the proper
format. .................................................... E-102
2. Format the diskette. ............................. E-102
3. Use a different diskette.
Use a different diskette.
1. Use a different diskette.
2. Delete any files you no longer need in order
to make room for the data you want to
save. ....................................................... E-101
1. Delete data you no longer need from the
user area that corresponds to the file you
are trying to store.
2. If you have song data stored in Song
Memory (SG0 to 4), delete the song data
you no longer need. ............................... E-72
Use SMF 0 format files only
1. Eject the diskette from the drive and reload
it. ............................................................... E-94
2. Load a diskette into the drive.
Use a diskette that contains data stored by this
keyboard or compatible data from another device.
1. Use a different diskette.
2. Close the diskette’s write protect hole to
enable data storage. ............................... E-95
Delete SMFs you no longer need from your
SMF data (page E-80).
Use other data or another diskette.
Use a different name (page E-100).
735A-E-107A
Saving Data
WK3000_e_89-105.p65
03.4.8, 11:52
105
