13
Preparation
• Starting your vehicle.
REPLACING THE FUSE
If the cigarette-lighter plug’s fuse is broken or blown, replace it
with a 5A
1
/
4
×
1
1
/
4
-inch fast-blow, automotive glass type fuse.
To remove the fuse, turn the knurled knob counterclockwise
then remove the tip cap.
Caution: Do not use a fuse with ratings other than those speci-
fied. Doing so might damage your adapter.
To reassemble the cigarette-lighter fuse holder, insert the com-
ponents in the following order: 1) fuse, 2) tip cap with spring, 3)
knob.
273-1826.fm Page 13 Thursday, October 5, 2000 8:39 AM