55
Troubleshooting
Troubleshooting
Symptom
Solution
VOX does not work
Turn on the VOX feature. See “Using HandsFree (VOX)” on Page 43.
No power
• Reposition or replace alkaline batteries.
• Recharge or replace the battery pack.
Message not transmitted
• Make sure
M
is completely pressed as you transmit.
• Reposition, replace, or recharge the batteries.
Unwanted noise or conversa-
tion on a channel
• Make sure an interference eliminator code is set.
• A shared channel or interference eliminator code might already
be in use. Try another channel or interference eliminator code.
Message scrambled
An Eavesdrop Reducer code might be set, or the setting does not
match another Deluxe FRS radio where this code is already set. All
Deluxe FRS radios in a group must use the same Eavesdrop Reducer
code.
Channel and/or code locked
The menu might be locked. Unlock the menu by holding down
\
for
about 3 seconds.
Other radios are not receiving
your transmission
QuieT6000
TM
might be set (see “QuieT6000
TM
” on Page 45). Turn off
QuieT6000
TM
or press
(
.