background image

2

THE FCC WANTS YOU TO 
KNOW

Your radio might cause TV or radio interfer-
ence even when it is operating properly. To
determine whether your radio is causing the
interference, turn off your radio. If the interfer-
ence goes away, your radio is causing it. Try
to eliminate the interference by:

• moving your radio away from the receiver

• connecting your radio to an outlet that is

on a different electrical circuit from the
receiver

• contacting your local RadioShack store

for help

If you cannot eliminate the interference, the
FCC requires that you stop using your radio.

This device complies with Part 15 of the 

FCC

Rules. Operation is subject to the following
two conditions: (1) this device may not cause

harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired opera-
tion.

CONNECTING POWER

Using Batteries

Your radio requires six D batteries (not sup-
plied) for power. For the best performance
and longest life, we recommend RadioShack
alkaline batteries.

Cautions:

• Use only fresh batteries of the required

size and recommended type.

• Do not mix old and new batteries, differ-

ent types of batteries (standard, alkaline,
or rechargeable), or rechargeable batter-
ies of different capacities.

1. Press the battery compartment cover

tabs in the direction of the arrows and pull
the cover open.

2. Place three D batteries in the lower level

of the battery compartment, on top of the
ribbon, and three D batteries on top of the
first three batteries, matching the polarity
symbols (+ and –) marked inside.

3. Replace the cover and set 

AC/DC

 on the

back of radio to 

DC

.

When the sound becomes weak or distorted
or the radio stops operating properly, replace
the batteries.

Warning:  Dispose of old batteries promptly
and properly. Do not burn or bury them.

Caution: If you do not plan to use the radio
with batteries for a week or more, remove the
batteries. Batteries can leak chemicals that
can destroy electronic parts.

WARNING:

 To reduce the risk of fire or shock

hazard, do not expose this product to rain or mois-
ture.

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN.

CAUTION:

 TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.

This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.

This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accompa-
nying this product.

!

!

Reviews: