T
roubleshooting
7
'
4#5+0)
"
&
#6#
'TCUKPI
"
C
"
5KPING
"
(KNG
1. In the standby mode, press
FILE
and
#
or
,
to select
the message you want to erase.
2. Press
ERASE
.
;h7I;
;h7I;
;h7I;
;h7I;
flashes.
3. Press
ERASE
again while
;h7I;
;h7I;
;h7I;
;h7I;
flashes to delete the
file.
±
'TCUKPI
"
#NN
"
/GUUCIGU
"
KP
"
C
"
(KNG
1. In the standby mode, select the file you want to erase.
2. Press and hold
ERASE
for about two seconds.
;<?B;
;<?B;
;<?B;
;<?B;
flashes.
3. Press
ERASE
again.
;h7I;
;h7I;
;h7I;
;h7I;
appears to indicate that all
messages have been erased.
6417$.'5*116+0)
4'5'66+0)
"
6*'
"
4'%14&'4
If the recorder stops operating properly, follow these steps
to reset it.
1. Remove the batteries.
2TQDNGO
5WIIGUVKQP
Nothing happens after pressing a
button.
Make sure HOLD is set in the
opposite direction from the
arrow.
Make sure that fresh batteries
are correctly installed.
There is no sound.
Make sure the volume is
turned up.
Make sure an earphone is not
connected to the recorder.
The recorder will not record.
Make sure
<KBB
<KBB
<KBB
<KBB
does not
appear on the display.
Make sure the number of
recorded messages in the
selected file has not reached
100.
Make sure there is enough
remaining recording time.
±
"
016'
"
±
"
Care
Keep the recorder dry; if it gets wet,
wipe it dry immediately. Use and
store the recorder only in normal
temperature environments. Handle
the recorder carefully; do not drop
it. Keep the recorder away from
dust and dirt, and wipe it with a
damp cloth occasionally to keep it
looking new.
Service and Repair
If your recorder is not performing
as it should, take it to your local
RadioShack store for assistance.
Modifying or tampering with the
recorder’s internal components can
cause a malfunction and might
invalidate its warranty and void
your FCC authorization to operate
it.
±
"
016'
"
±
"
Erasing Data
To cancel the erase, within five
seconds press any button except
ERASE.
