![background image](http://html.mh-extra.com/html/radio-shack/digital-telephone-answering-device/digital-telephone-answering-device_owners-manual_778067023.webp)
23
To delete all messages after playback, hold down
DELETE
for
about 3 seconds. The TAD sounds four tones.
Note: If you press
DELETE
before playback of all messages, the
TAD sounds four tones to alert you. You cannot delete all mes-
sages until you playback all new messages.
REMOTE OPERATION
While you are away from your home or office, you can use a
touch-tone phone or a pulse (rotary) phone with a pocket tone di-
aler to enter your remote operation security code and do any of
the following:
• set the TAD to answer calls
• listen to your messages
• record a new OGM
• record a memo
• delete individual message
REMOTE OPERATION SECURITY CODE
To use your TAD from a remote telephone, you must first enter
a 3-digit remote operation security code. The security code la-
bel is located at the bottom of the TAD. Enter the security code
after the TAD answers and sounds two beeps. Within 7 sec-
onds, enter one of the remote commands.
43-3801.fm Page 23 Friday, April 21, 2000 9:25 AM