18
USING TONE SERVICES WITH A PULSE
LINE
Some special services, such as bank-by-phone, require tone sig-
nals. If you have pulse service, you can still use these special tone
services.
With
TONE/PULSE
set to
PULSE
, press
∗
at the point where tone sig-
nals are required. Any additional numbers you dial are sent as tone
signals.
TONE/PULSE
automatically resets to
PULSE
when you hang
up.
Note: You can set
TONE/PULSE
to
TONE
during the call at the point
where tone signals are required. If you do this, be sure to set
TONE/
PULSE
back to
PULSE
when the call is over.
43-890.fm Page 18 Monday, August 16, 1999 2:01 PM