8
ATTACHING THE
HEADSET HANGER
The ET-196 comes with a headset
hanger that gives you a convenient
place to rest your headset when it is not
in use.
To attach the holder, simply insert the
headset hanger into the holes on the up-
per left of the headset amplifier.
ADJUSTING THE
HEADSET
1. Place the headset on top of your
head with the earpiece over either
ear.
2. Adjust the headset band until it rests
with almost no pressure on your ear
and the top of your head.
If the headset is loose, remove it
and adjust it inward slightly to
tighten it. If the headset is tight, gen-
tly pull the headset band out to
loosen it.
3. Hold the headset in place, and
adjust the microphone boom until it
is about even with your chin. Experi-
ment until you find the most comfort-
able position.
Caution: The microphone boom
swivels on the headset. Do not bend
the microphone boom while you
adjust it.
illustration
43-196.fm Page 8 Thursday, August 12, 1999 3:47 PM
