Radio Shack ITZA 2, Owner'S Manual

8

Operation

To switch from headset to speakerphone,
just unplug the headset from the phone.

USING MUTE

To temporarily disconnect the speaker-
phone, handset, or headset without ending
the call, so you can talk privately with some-
one in the room, press 

MUTE

. The MUTE in-

dicator lights. 

To resume your call, press 

MUTE

 again. The

MUTE indicator goes off. 

Note: The Mute feature is automatically can-
celled when you hang up, switch to the other
line, press dial buttons, memory buttons, or

LOWER/FLASH/REDIAL

 during a call.

USING REDIAL

You can quickly redial the last number dialed
by pressing 

REDIAL/PAUSE

 when you hear a

dial tone. The redial number is replaced each
time you dial a new number. The redial mem-
ory holds up to 32 digits, so it can store long-
distance as well as local numbers. 

Note: The redial memory only stores the first
32 digits of any number dialed.

USING FLASH

Use 

FLASH 

to perform the switchhook opera-

tion for special services, such as Call Wait-
ing. 

1. Press 

FLASH

 to put a call on hold and

take a second incoming call on the
same line. 

2. Press 

FLASH

 again to return to the first

call.

USING HOLD

To place a call on hold, press 

HOLD

. The line

indicator flashes slowly. To return to the call,

press the line button you are using or pick up
a parallel phone. 

Note: Pressing another line button without
pressing 

HOLD

 disconnects the current call.

USING THE DATA PORT

The phone is equipped with an extra phone
jack that allows you to connect a communi-
cation device (a computer modem, answer-
ing machine, or fax machine) to Line 2.
Connect a line cord (not supplied) from the
communication device to the 

DATA

 jack. 

Note: You can not use Line 2 while a com-
puter modem or fax machine is connected to
the DATA jack and in use. Line 1 still func-
tions normally. When you are finish using the
modem or fax machine, Line 2 will be avail-
able.

MEMORY DIALING

You can store up to 20 numbers (32 digits
each) in memory and dial any stored number
by pressing one or two keys.

Storing a Number in Memory 

The phone has 10 memory location buttons.
Each button can recall two stored numbers:
one upper memory number and one lower
memory number. 

1. Pick up the handset or press 

SPK-

PHONE/HEADSET

. 

2. Press 

STORE

3. Enter the number you want to store,

including any pause. See "Entering a
Pause".

4. Choose a memory location and store the

number there.