O
WNER
’
S
M
ANUAL
PROGRAMMING FAVORITE CHANNEL SCAN
In all modes except
DVD
, the RadioShack 4-in-One Remote can store a list of
up to 10 favorite channels, in any order, that will be immediately scanned
when you press
FAV SCAN
once (see
Using Channel Scan
on the next page).
NOTE
: Favorite channels can only be programmed for one mode. After programming,
if
FAV SCAN
is pressed while in another mode, the remote will start a normal channel
scan instead (if applicable to the selected device).
1. Press and hold
P
until the bottom IR segment flashes twice. The program
keys will appear:
2. Select a
Favorite Channel Mode
by pressing
VCR
,
TV
, or
CBL/SAT
once.
The bottom IR segment flashes once as the selected device key animates.
3. Press above
OTHER
once. The
Other
programming screen will appear:
4. Using the number keys, enter
9 9 6
. The bottom IR segment will flash
twice and the
Favorite Channel
programming screen will appear.
NOTE
: If the bottom IR segment displays one long flash, an error has occurred.
Try repeating this step.
5. Using the number keys, enter a favorite channel number (e.g.,
0 1 2
).
Then press
P
once.
NOTE
: If the original remote control required pressing an Enter key to change the
channel, also press the
ENTER
key after the channel number (e.g.,
0 1 2 ENTER
).
6. If desired, repeat step 5 for each channel to be stored, up to a total of
10 channels.
NOTE
: After storing 10 channels, the remote control will exit the Favorite Channel
programming screen and again display the program keys.
7. To exit programming with less than 10 favorite channels stored, press and
hold
P
until the bottom IR segment flashes twice. Then press
once and
the display will return to the last-selected device menu screen.
Programming Favorite Channel Scan
21
RS 4in1 Kameleon OM rev 8/19/03 8:42 PM Page 21
