19
Instead, you see:
Manually Setting the Clock
Follow these steps to manually set the clock if
EDS is not available in your area, if you do not
want the VCR to search for an EDS signal, or if
you skipped tuner programming.
Notes:
• The clock must be accurately set for proper
automatic timer recording. We suggest you
refer to a radio station or time/temperature
service for the correct time.
• If you do not press a button within 5 min-
utes in Steps 2–9, the clock is not set. Start
again from Step 1.
1. Press
MENU/ACTION
to display the main
menu.
Note: To exit the programming mode at
any time, press
MENU/ACTION
.
2. Repeatedly press
or
to highlight
SET
CLOCK
, then press
.
3. Repeatedly press
or
to highlight
MANUAL
, then press
.
4. Repeatedly press
or
to select the
correct month, then press
.
5. Repeat Step 4 to select the correct date,
year, and hour, then press
.
6. Repeatedly press
or
to select a
minute that is 1 or 2 minutes after the current
time, then press
. (For example, if it is 42
minutes past the hour right now, enter 43
minutes.) This gives you time to complete
this procedure before starting the clock.
Note: Your VCR uses a 12-hour clock. Be
sure you correctly set AM or PM.
7. Repeatedly press
or
to set
DST
(daylight saving time) to
ON
or
OFF
.
When you set
DST
to
ON
, the VCR auto-
matically adds 1 hour on the first Sunday in
April, and subtracts 1 hour on the last Sun-
day in October.
8. Press .
SET
COMPLETED
appears.
9. Review the information you entered.
If the information is not correct, move the
cursor to the incorrect entry by repeatedly
pressing
(marked to the left of
REW
on
the remote control) or
, then enter the
correct information.
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH VCR CH UP KEY AGAIN
NO CH FOUND
RE
NEL
UE : ENGL I SH
Y
KEY
- - - - - - - - -
CK SET
Y
KEY
K
- - - - - -
DST : ON
:
Y
KEY
- -- - - - - -
K
- - - - - -
KEY
DST : ON
12: 0 0 PM
- -- - - - - -
K
- - - - - -
16-635.fm Page 19 Wednesday, July 21, 1999 9:03 AM
