background image

34

35

Weather Scan

To scan for weather transmissions:

1.

Press 

Func

 + 

3

DEF

/WX

.

WX Scan

 appears. You 

can change the scan direction by rotating the 
knob.

2.

If you want to stop the scan, press 

SRCH/PSE

.

*PAUSE*

 appears.

Turning on the Weather Alert Feature 

Your scanner can detect the 1050 Hz tone weather 
alert signal broadcast by the NOAA Weather 
Service during an event in your local area. 

1.

Press 

Func

 + 

3

DEF

/WX

 and start weather 

scan.

2.

Press 

Func

 + 

3

DEF

/WX

.

WX Alert Standby 

appears. This mutes the audio until the 
scanner receives a weather alert signal. 
When the scanner receives a signal, 

WX Alert!

appears. The scanner remains on the weather 
channel and the audio turns on so you can 
hear the weather broadcast. Press any key to 
stop the siren.

Skywarn

Your scanner has 10 skywarn channels, and the 
Skywarn function lets you jump directly to the last 
channel in memory (Channel 999) from any mode 
by pressing and 

Func

 + 

E

PGM

/

. The scanner 

goes into Skywarn mode and starts receiving 
transmissions in the last channel. Rotate the knob 
to select the skywarn channels you want to hear.

Before using this feature, enter the local Skywarn 
frequency for your area into Channel 990 to 999. 
If no frequency is programmed in the selected 
skywarn channel, 

Skywarn freq. is not stored

 appears 

and the scanner sounds an error tone.

About Skywarn

Skywarn is an organized group of trained weather 
observers. A Skywarn group exists in virtually 
every US county with a significant population. 
During inclement weather, reports made by 
Skywarn observers include information about:

• Pea-sized and larger hail

• Wind and wind gusts of 40 MPH and greater

• Heavy rainfall

• Lightning (cloud-to-cloud and especially 

cloud-to-ground)

• Wall clouds seen in severe thunderstorms 

(which spawn tornadoes)

• Severe lowering of a wall cloud

• Turbulence in a wall cloud

• Funnel clouds

• Tornadoes

• High water areas

• Downed power lines

• Other emergency conditions that affect life 

or property

Listen to Skywarn to hear trained observers in 
your vicinity call in official reports to a net control 
station which relays those reports to NOAA and 
other emergency agencies. Listen to NOAA for 
weather alerts and warnings, watch box notices, 
and weather forecasts.

Note:

 If you tune to a Skywarn frequency 

when the Skywarn net is not active, you may 
hear nothing, or you may hear amateur radio 
operators talking on a local repeater system. 

Summary of Contents for PRO-137
























Reviews: