22
3. Press
LIMIT
.
Hi
and a frequency
appear on the display.
4. Using the number keys, enter
the highest frequency you want
to search within the desired fre-
quency range, then press
ENTER
.
5. Press
D
to search upward from
the lower to the upper limit, or
press
—
to search downward
from the upper to the lower limit.
-L-
,
SEARCH
, and s or t
appear, and the next available
monitor memory flashes on the
display.
6. When the scanner finds an
active frequency you want to
monitor, you can do one of the
following:
• To store the displayed fre-
quency into the current moni-
tor memory, quickly press
MON
.
• To continue the search, press
D
or
—
.
To hold the frequency, press
LIMIT
.
-H-
appears on the dis-
play.
Press
LIMIT
again to exit the
hold mode and resume the limit
search.
Notes:
• If you press
D
or
—
during
the hold mode, the frequency
changes in the current step
increment toward the upper or
lower limits.
• If you tune to a search skip
frequency, the display shows
LOCKOUT
(see “Search Skip
Memory”).
Direct Search
A direct search lets you specify a
starting frequency, then search for
active transmissions above or below
the specified frequency.
Note: You can use the scanner’s de-
lay feature while using direct search
(see “Delay”).
1. Press
MANUAL
.
20-414.fm Page 22 Wednesday, August 4, 1999 11:12 AM