background image

channels. 
 
   162.400 MHz                 162.475 MHz             162.550 MHz 
 
   162.425 MHz                 162.500 MHz 
 
   162.450 MHz                 162.525 MHz 
 
We recommend you record your scanner's serial number here.  The number is 
on the scanner's back panel. 
 
Serial Number: _________________________________ 
 
FCC Notice 
 
Your scanner might cause TV or radio interference even when it is 
operating properly.  To determine if your scanner is causing interference, 
turn off your scanner.  If the interference goes away, your scanner is 
causing it.  Try to eliminate the interference by: 
 
   Moving your scanner away from the receiver. 
 
   Connecting your scanner to an outlet that is on a different electrical 
   circuit from the receiver. 
 
   Contacting your local RadioShack store for help. 
 
If you cannot eliminate the interference, the FCC requires that you stop 
using your scanner. 
 
This device complies with Part 15 of the FCC Rules.  Operation is subject 
to the following two conditions: 
 
   (1) this device may not cause harmful interference, and 
 
   (2) this device must accept any interference received, including 
       interference that may cause undesired operation. 
 
Scanning Legally 
 
It is legal to listen to almost every transmission your scanner can 
receive.  However, there are some electronic and wire communications that 
are illegal to intentionally intercept.  These include: 
 
   Telephone conversations (cellular, cordless, or other private means of 
   telephone signal transmission). 
 
   Pager transmissions. 
 
   Scrambled or encrypted transmissions. 
 
According to the Federal Electronic Communications Privacy Act (ECPA), as 
amended, you could be fined and possibly imprisoned for intentionally 
intercepting, using, or disclosing the contents of such a transmission 
unless you have the consent of a party to the communication (unless such 
activity is otherwise illegal).  These laws change from time to time and 
there might be state or local laws that also affect legal scanner usage. 
 
 
 
 

Summary of Contents for PRO-2046















Reviews: