55
Beyond the Basics
active. Press
e
to continue searching the entire trunked
system.
ID lockout
Like conventional scanning, it is possible to lock out
unwanted traffi c. This is particularly important in trunked
systems because in many areas, water meters, door alarms,
traffi c signals, and other mechanical devices are assigned IDs
just like other users. Also, some departments scramble or
encrypt their communications, and you may want to lock out
these unintelligible broadcasts.
To lock out an ID, press L/O on the ID you want to lock out.
The ID is locked out. You can lock out up to 100 IDs. An error
message (Full) appears when you try to register the 101st
lock out.
reviewing ID lockout
You can check all IDs already locked out.
1. Select the trunking programming mode and the bank you
want to review.
2. When the selected trunked system is displayed, press E.
3. Use
e
or
d
to choose Id Lout, and press E.
4. Press L/O, the ID is unlocked and the next locked ID
displays.
5. If you unlocked all locked IDs, the scanner displays Lo
Non.
restoring locked-out IDs
To restore a single ID, while in locked out review mode, select
the locked out ID you want to restore and press L/O. The ID is
restored and L/O disappears. To restore all locked out IDs in a
