20-428 Owner’s Manual
Page 31 of 50
to lo.
reviewing locked-out channels
To review all locked out channels, press MAN. Then repeatedly alternate between pressing FUNC
and then L/OUT to view each locked-out channel. When you finish reviewing locked-out channels,
press MAN.
locking out frequencies
To lock out a frequency during a search, press L/OUT when the scanner stops on that frequency. The
scanner locks out the frequency, then continues searching.
Notes:
•
The scanner does not store locked out frequencies during a search.
•
You can lock out as many as 50 frequencies in each bank. If you try to lock out more, L/O Memory
Full! appears
•
If you lock out all frequencies in one search bank and only this search bank is activated, All
ranges Locked out! appears and the scanner does not search.
reviewing locked-out frequencies
To review the frequencies within a search bank that you locked out:
1. Press SRCH to set search mode.
2. Press FUNC then L/OUT. The locked-out frequency and Lockout list appear. Press /¥ or ¥/ to
review the list. The locked-out number and the total locked-out number also appears as Lockout XX
of YY. (The tenth of thirty locked out number would appear as Lockout 10 of 30). If the search bank
has no locked-out frequencies, No Lockout appears. Press FUNC then L/OUT again to cancel
reviewing locked-out frequencies.
clearing a locked-out frequency
To clear a locked-out frequency, select that frequency (see “Reviewing Locked-Out Frequencies”),
then press CLEAR.
If all locked-out frequencies are cleared within a bank, No Lockout appears.
clearing all locked-out frequencies in a search bank
1. Press SRCH.
