20
OPERATION
TURNING ON THE SCANNER AND SETTING
SQUELCH
1. Turn
SQUELCH
fully clockwise.
2. Turn
VOLUME/OFF
clockwise until it clicks. The scanner automati-
cally scans the 30 channels.
Note: The first time you turn on the scanner, the channels might
not have any frequencies stored in them, but the scanner will con-
tinuously scan the empty channels.
3. Press
MANUAL
to stop the scanning. The display shows the cur-
rent channel.
4. Turn
VOLUME/OFF
clockwise to set the scanner’s volume about
half way.
20-508.fm Page 20 Wednesday, August 4, 1999 1:50 PM