30
31
Priority Scan
You can designate increased priority to certain
objects:
•
CONV – The scanner samples objects for activity
more frequently.
•
TGRP – The scanner checks the priority object
first and during reply delays of non-priority
objects.
To set priority for objects:
•
While scanning, when the scanner stops for a
transmission, press
PRI
.
Note
: plD will change to PlD indicating priority
is set.
•
In Manual or Program modes, browse to the
object and then press
PRI
.
Note
: plD will change to PlD indicating priority
is set.
•
You can edit an object's Priority setting directly
during programming.
G
Scanning
1 . 3 . . . 7 . . .
PRI
. . . . . . . . . .
Priority On
Priority Off
G
Scanning
1 . 3 . . . 7 . . .
pri
. . . . . . . . . .
To activate Priority Scan Mode:
While the radio is scanning, press
FUNC
and then
press
PRI
. Repeat to cancel Priority Scan Mode.
NOTE:
Priority sampling may cause brief muting of
received audio if another object is active.
Favorites Scan List
To add an object to the Favorites Scan List, press
FUNC
and then
FAV
while the object is active.
When you press
FAV
later, your scanner suspends all
scanning except for the Favorites Scan List.
To clear the entire FAV Scan List:
1.
Press
PGM
.
2.
Press the
GLOB
softkey.
3.
Scroll to down to the
Clear FAV
menu item.
4.
Press
SEL
. You will be asked to confirm the
action.
5.
Press the
Save
softkey.
