background image

68

69

CB – Searches the Citizens Band radio frequencies.

Marine – Searches the VHF-FM marine radio band.

FRS/GMRS/MURS/DOT/STAR (F/G/MURS)

Railroad – Searches the Association of American 
Railroads (AAR) VHF railroad frequencies used in the 
US and Canada.

Weather frequencies

162.400, 162.425, 162.450, 162.475, 162.500, 162.525, 
162.550 MHz

Scanning Rate

 .................Approx. 55 channels per second

Search Rate

 ...........................Approx. 90 steps per second

Display

LCD with amber LED backlight, 4 lines of 16 characters 
each, plus 13 display icons

Zeromatic

Automatically zeroes receiver on correct frequency 
during searches

Audio Output

 ...............................................................250 mW

Internal Speaker

 ...........................36 mm 8 ohms dynamic

Operating Voltage

6 VDC (4 AA alkaline, Ni-Cd, or Ni-MH)

External Power and Charge Voltage

9 VDC 400 mA regulated power supply

Dimensions (WxDxH)

 ................. 2.56 x 1.65 x 5.71 inches 

......................................................................... 65 x 42 x 145 mm

Weight

 (not including batteries and antenna)

Approx. 8.5 ounces, 240 grams

Memory backup

No backup battery required, utilizes non-volatile 
EEPROM memory
Specifications are typical; individual units might vary. 

Specifications and depictions are subject to change 

and improvement without notice.

Maintenance

Keep the scanner dry; if it gets wet, wipe it dry 
immediately. Use and store the scanner only in 
normal temperature environments. Handle the 
scanner carefully; do not drop it. Keep the scanner 
away from dust and dirt, and wipe it with a damp 
cloth occasionally to keep it looking new.

Modifying or tampering with the scanner’s 
internal components can cause a malfunction and 
might invalidate its warranty and void your FCC 
authorization to operate it.

Birdie Frequencies

Birdies are operating frequencies, which all scanners 
have, that are created inside the scanner’s receiver 
and can cause interference. If the interference is not 
severe, adjusting the squelch might omit the birdie, but 
if you program one of these frequencies after a search 
you will hear only noise on that frequency. 

To find birdies in your scanner:

1. 

Disconnecting the antenna. 

2. 

Make sure that no other nearby radio or TV sets 
are turned on near the scanner. 

3. 

Press 

TUNE

 and then press 

PSE

. The scanner 

will search for frequencies and occasionally stop 
as if it has found a signal. This is a birdie. 

4. 

Make a list of all the birdies in your scanner for 
future reference.

5. 

Press 

L/OUT

 to lock out the frequency for any 

future searches after you have reconnected the 
antenna.

Summary of Contents for PRO-651






































Reviews: