108
Detailed Menu Reference
109
TSYS
Parameter
Options
Description
Threshold Lo
1-99
Available When Multi-Site is set to ROAM. Sets the
control channel decode % threshold for a site to
be considered out of range, which will begin the
process of looking for a new site.
T Tables
Default,
Splinter,
Custom
For Motorola and P25 systems only - sets custom
channel tables. Use
, to select option, press
SEL
on Custom to enter custom table information.
Fleet Map
Type I
For Motorola Type I systems only—sets fleet map.
LMIT Menu
The LMIT menu is used when creating new Limit Search objects, or
editing existing Limit Search objects.
LMIT
Parameter
Options
Description
Scan Lists
On or Off for Scan
Lists 1-22
Sets membership in Scan Lists. Use
keys to scroll through Scan Lists. Use
SEL
key to toggle Scan List membership. A “
*
”
next to the Scan List number indicates that
the object is mapped to that Scan List.
FrLo
Any supported
frequency in MHz
A frequency that will be used as the lower
limit for the limit search range.
FrHi
Any supported
frequency in MHz
A frequency that will be used as the upper
limit for the limit search range.
Tag
Alpha-
numeric text
The alphanumeric display name for the
LMIT search. Use the standard text entry
method or QTXT to name the object.
L/Out
On or Off
Permanent lockout for the LMIT channel.
Also accessed by pressing
FUNC L/OUT
while the scanner is stopped on the LMIT
object.
LED Mode
Solid or Flash
Controls whether the Alert LED flashes
or remains on solid when the Alert LED is
used.
LMIT
Parameter
Options
Description
LED Color
0-7
Sets LED color to
0-7
as defined in the
GLOB menu. By default,
0
=LED Off,
1
=Red,
2
=Yellow,
3
=Green,
4
=Cyan,
5
=Blue,
6
=Magenta,
7
=White.
Latch LED
On or Off
Normally the Alert LED is active only while
the object is receiving a transmission.
When
Latch
is on, the Alert LED will remain
lit after the transmission is complete, un-
less overridden by a subsequent object
that is also using the Alert LED.
Backlight
On, Off or Flash
Controls whether the backlight should be
on, off or flashing while the object is active.
Alarm
None, Chirp,
Hi-Lo, Alert, Ring,
2-Chirp, Fast Hi-
Lo, DTMF#
Sets the Audible Alarm for the LMIT ob-
ject. When an Audible Alarm is selected,
the selected alarm will play anytime the
scanner stops for activity on the LMIT
object while scanning.
Fav
Yes or No
When On, the LMIT object is a member of
the Favorites Scan List.
EXPERT BELOW
Modulation
Auto, AM,
FM,
NFM
Modulation setting for the LMIT search. In
most cases
Auto
will work fine. Use
AM
to
override and force AM modulation,
FM
to
force FM modulation,
NFM
to force narrow
FM modulation.
Atten
On or Off
When on, applies 20 dB of attenuation to
all hits received on the LMIT search. Useful
in areas where interference from nearby
strong signals is present.
Delay
On or Off
Controls whether a Delay is used to wait
for reply traffic after a transmission is
received during the LMIT search.
Delay Time
1-250 x 100 ms
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if
Delay is On, e.g., 20=2 seconds.
Summary of Contents for PRO-652
Page 8: ......
