98
Detailed Menu Reference
99
GLOB
Parameter
Options
Description
Clear Hits
SEL
Press
SEL
to clear all hit counters.
Hit Counts
Yes or No
Turns the hit counter feature on or off.
Dflt ScanList
0-22
Sets default destination Scan Lists for new
objects and CONV Stor from Searches,
Signal Stalker II, and Tune. Use
1-20
for
“normal” Scan Lists 1-20. Use
0
for the
“ns” (not scanned) Scan List (no Scan List
mappings are specified). Use
21
for the FAV
Scan List. Use
22
for the Skywarn Scan List.
Priority
On or Off
Turns Priority Scan On or Off. Priority Scan
can also be toggled by pressing
FUNC PRI
while scanning.
WxPri
On or Off
Toggles Weather Priority Mode on or off.
Also accessed by pressing
WX
, then
PRI.
Scan Lists
SEL
Enters sub menu for Scan List settings and
status.
SRCH L/Outs
SEL
Enters sub menu for review, editing or dele-
tion of search lockout frequencies.
Clear FAV
SEL
Press
SEL
to clear the Favorites Scan List.
Memory Info
SEL
Press
SEL
to see the current memory
usage.
EXPERT BELOW
Tune LED
On or Off
Activates Signal Strength driven LED when
in Tune mode.
Color 0-7
Red, Green, Blue
(RGB) value
Sets intensity of red, green and blue LEDs.
Press SEL to edit colors. Press
to scroll
to R, G or B LED settings. Use numeric keys
to activate preset intensity levels for each
LED, or use
keys to fine scroll intensity.
Qtxt 1-0
Text value
Sets QTXT (QuickText) 0-9 text. Use “$” to
indicate end of text.
Key Repeat
On or Off
Toggles key repeat mode when a key is
held down.
GLOB
Parameter
Options
Description
LCD BlinkOff
1-250 x 10 mS
For alternating text displays, sets the
display time for the secondary display
element.
LCD BlinkOn
1-250 x 10 mS
For alternating text displays, sets the dis-
play time for the primary display element.
LED BlinkOff
1-250 x 10 mS
When the Alert LED setting for an object is
set to Flash, this is the amount of time the
LED stays turned off.
LED BlinkOn
1-250 x 10 mS
When the Alert LED setting for an object is
set to Flash, this is the amount of time the
LED stays turned on.
Pri Channels
0-250
Number of priority CONV channels to
check during a priority scan sampling. “
0
”
samples all CONV priority channels.
Pri Interval
2-100 x 100 mS
Conventional frequency priority sample
interval.
TGRP Pri Int
On or Off
Toggles priority interrupt scanning during
trunked calls.
QuickPriRtn
On or Off
When on, does not wait for verification of
correct CTCSS, DCS or NAC when return-
ing to an active CONV channel after priority
sampling
Search Delay
1-250 x 100 ms
Sets wait for reply delay for all search
modes.
SRCH Dig AGC
On or Off
Sets digital AGC mode on or off for all
search types. Useful to compensate for low
or high digital audio levels caused at the
system.
SRCH SuprTrk
On or Off
Alternative DSP decoding algorithm is
applied to all search types. May help
reception on some systems.
Summary of Contents for PRO-652
Page 8: ......
