29
Band Search
If you do not know of a frequency to store, you can search
your scanner’s preprogrammed search bands (see
“Search Bands” on Page 24) for active frequencies, then
store any that you find into your scanner’s channels.
Follow these steps to search for and store active frequen-
cies using band search.
1. Press
BAND
. The last selected band number (
b
fol-
lowed by the band number) and the frequency
search range appear for about 2 seconds.
2. To select a different band, within 2 seconds, enter
the band’s number (0–9) or repeatedly press
BAND
until the desired band number appears.
After about 2 seconds,
SRCH
appears, the next
available channel flashes, and the scanner begins
searching rapidly upward in that band (from lowest to
highest frequency) for an active frequency.
20-566.fm Page 29 Thursday, August 5, 1999 8:04 AM