30
Notes:
• To reverse the search direction at any time, hold
down
for about 1 second.
• To search the band upward or downward in small
increments (in steps of 5 or 12.5 kHz, depending
on the band), repeatedly press and release
or
.
• To select a different band after the scanner begins
searching the current band, simply repeat Step 2.
The scanner stops when it finds an active frequency.
3. To store the displayed frequency in the channel cur-
rently flashing on the display, press
E
. The scanner
stores the frequency, then the next available channel
flashes.
Notes:
• You cannot store a frequency in the monitor mem-
ory during band search.
• After you store a frequency into the last available
channel,
--ch
appears instead of a channel
number. If you try to store a channel while
--ch
appears,
Ch
FULL
appears briefly. In order to
store more frequencies, you must clear some
channels. See “Clearing a Channel” on Page 34.
4. To search for another active frequency in the
selected band, hold down
or
for about 1 sec-
ond.
20-566.fm Page 30 Thursday, August 5, 1999 8:04 AM
