28
To skip a frequency, press
S/S
when the
scanner stops on the frequency during a
search. The scanner stores the frequen-
cy in memory and automatically resumes
the search.
To clear a single frequency from search
skip memory so the scanner can stop on
it during a search, follow these steps.
1. Press
HOLD
to hold the search.
2. Press
)
or
(
to select the frequency.
L/O
appears.
3. Press
S/S
.
L/O
disappears from the display.
To clear all the search skip frequencies at once, during a search, press
HOLD
, then hold down
S/S
until the scanner beeps twice (about 3 sec-
onds).
Notes:
• If you skip all the frequencies in the weather band, the scanner will
not start searching. In this case, the scanner sounds three beeps.
• If you program more than 20 frequencies to skip, each new fre-
quency replaces one you already stored, starting from the first fre-
quency you stored.
• You can manually select a skipped frequency.
L/O
appears on the
display when you select a skipped frequency.
MANUALLY SELECTING A CHANNEL
You can continuously monitor a single channel without scanning. This
is useful if you hear an emergency broadcast on a channel and do not
want to miss any details — even though there might be periods of si-
lence — or if you want to monitor a specific channel.
R A C E
M A N
PR OG
B A N D
S C A N
HOLD
D A T A
1
2
3
1-10
11-20
2 1 - 3 0
H/S
S/ S
4
5
6
31-40
41-50
51-60
PRIORITY
L -O UT
DEL
7
8
9
61-70
71-80
81-90
0
E
91-100
KEYLOCK C L EA R
W X
20-513aPAGE29.fm Page 1 Monday, May 5, 2003 1:51 PM