43
Beyond the Basics
direct entry search
You can use direct entry search to search up or
down from the currently displayed frequency.
X
If the scanner is scanning or searching, press
HOLD
.
Y
Enter the frequency you want to start from by
using the number keys. (Press
./CLR
to enter a
decimal point).
Z
Press
FUNC
+
or
. The scanner searches,
starting from the frequency you entered in
Step
Y
.
If you enter a frequency that is out of range, the
scanner sounds an error tone and
Error
appears.
Press
FUNC
+
to change the search direction
downward or
FUNC
+
to change the search
direction upward. Frequencies appear during the
search.
Notes:
•
You can set the delay function on or off during
the search or while the search stops.
•
You can skip a frequency when the search stops.
After the search skip frequency is set, the
scanner starts direct search again.
