49
Beyond the Basics
Notes:
•
The scanner does not skip locked-out channels
when you use Signal Stalker. You must lock out
frequencies instead. See “Locking Out
Frequencies.”
•
You can still manually select locked-out
channels.
To unlock a channel, manually select the channel,
then press
FUNC
+
L/O
.
L/O
disappears.
To unlock all channels in the banks that are turned
on, press
HOLD
to stop scanning, then press
FUNC
and press and hold
L/O
until the scanner beeps
twice.
locking out frequencies
While searching and using Signal Stalker, you can
reduce the number of “hits” from frequencies you
do not want to find by locking out frequencies that
have a continuous transmission, such as a radio
pager.
Press
FUNC
+
L/O
to lock out a frequency.
L/O
appears.
