66
Reviewing the Lock-Out Channels
To review all locked out channels, press MAN, then repeatedly press FUNC then L/OUT.
The scanner will advance to the next locked out channel each time you press FUNC,
then L/OUT.
Locking Out Search Frequencies
To lock out a frequency during a search, press L/OUT when the scanner stops on that
frequency. The scanner will lock out the frequency and continues searching.
Notes
•
You can lock out as many as 50 frequencies in each search bank. If you try to lock
out more,
Memory Full!
will appear in the display, and you will be unable to lock out
any more frequencies until some have been cleared. See “Clearing a Locked-Out
Frequency” below.
•
If you lock out all frequencies in one search bank and only this search bank is
activated, All ranges Locked out! appears in the display and the scanner will not
search.
Reviewing Locked-Out Search Frequencies
To review the frequencies within a search bank that you locked out:
1. Press SRCH to set search mode, and select the desired search bank to review its
locked out frequencies.
2. Press FUNC then L/OUT. The last locked-out frequency and
Lockout list
appear.
Press
π
or
θ
to scroll through the list. The locked-out number and the total locked-out
number also appears as
L/O XX of YY
. (The tenth of twenty five locked out
frequencies would appear as
L/O 10 of 25
). If the search bank has no locked-out
frequencies,
Empty. Lockout List
appears in the scanner’s display. Press SRCH
to cancel reviewing locked-out frequencies.
