17
Ad
va
nc
ed
O
pe
ra
tio
n
that channel for two seconds after the transmission stops before
resuming scanning.
3.
To turn off the delay, press
FUNC
then
DELAY
while monitoring a
car number/channel.
D
disappears. Delay is ON by default.
Locking Out Channels
You can scan existing channels faster by locking out car numbers that
have continuous transmissions.
While scanning:
• Press
FUNC
then
0 (L/O)
when the scanner stops on the number
you want to lock out.
Lo
appears on the display.
Manually:
• Select the car number you want to lock out, then press
FUNC
and
0 (L/O)
.
Lo
appears on the display.
• To remove the lock out, manually select the car number, then
press
FUNC
and
0 L/O.
Lo
disappears.
n
Note
: You cannot lock out M1 channel.
Cell Phone Operation
To answer your cell phone and talk using the scanner, you will need
a microphone headset and a cable with
1
/
8
” (3.5mm) plugs on either
end (neither included).
1.
Connect the microphone headset to the
A
set of
s
/
MIC
jacks
on the left side of the scanner. The B set of jacks does not work
with the cell phone feature.
2.
Connect the
1
/
8
” (3.5mm) cable to the
PC/IF/PHONE
jack on the
right side of the scanner.
3.
When your cell phone rings, answer it on the phone, then press
the /
MON
button on the scanner to clear the transmission.
4.
Hang up your cell phone when you are finished talking.
