1
8. Rotate the knob to select
1: Edit Car#
, then
press
E
PGM
.
9. Use the number keys to enter the car number
in 3-digits, then press
E
PGM
.
10. Rotate the knob to select
2: Edit Tag
, then press
E
PGM
.
11. Use the number keys to enter the tag then
press
E
PGM
.
12. To program the next channel in sequence,
press
Menu
then repeat the steps from 3.
Notes:
• If you entered an invalid frequency in Step
5,
Invalid Freq
appears and the scanner beeps
error tones. Enter a valid frequency.
• If you entered a frequency in Step 5, which
already exists on another channel, the
scanner beeps an error tone and displays
that channel. Press
•CLR
to clear the display,
or press
E
PGM
to store the frequency in both
channels.
• The scanner automatically rounds the
entered number to the nearest valid
frequency. For example, if you enter 151.473
(MHz), your scanner accepts it as 151.475.
• Rotate the knob if you want to add a frequency
to a clear channel or different bank number.
Editing a Tag
To input a tag:
• Press the number/letter buttons multiple
times until the desired letter appears.
•
Rotate the knob clockwise to move the
cursor to the left, counterclockwise to move
to the right.
Summary of Contents for RPO-137
Page 42: ...42 Notes...
Page 43: ...43 Notes...
