background image

3.   Rotate the knob to select the option you 

want, then press 

E

PGM

.

4.  Rotate the knob to select 

1: On

 or 

2: Off

 then 

press 

E

PGM

.

 5.   Press and hold 

Menu

 to exit the Menu mode.

Signal Stalker I Options

1: Only Mode

  Set to 

1: On

 to turn on Signal Stalker I and 

turn off normal scanning. Set to 

2: Off

 to 

continue normal scanning while Signal 
Stalker I runs in the background.

2: Voice Interrupt

  Set this function to 

1: On

 if you want to 

keep the Signal Stalker I active despite 
interruptions while the scanner is receiving an 
audio signal.

   Set this function to 

2: Off

 if you do not want 

to hear interruptions. The scanner resumes 
checking signals when the audio signal ends.

Voice interrupt note:

While the Signal Stalker I is on and the 
scanner is receiving an audio signal (voice) 
in normal scanning, the scanner checks the 
Signal Stalker I every 2 seconds causing the 
audio signal to break at that moment. 

3: Logging

  Set this function to 

1: On

 to scan log channels 

along with normal channels. Set this function 
to 

2: Off

 if you do not want to scan log 

channels. 

Logging notes:

•   When the scanner finds a strong signal, it 

automatically saves the signal to one of 10 log 
channels. If the scanner finds a new frequency 

Summary of Contents for RPO-137













































Reviews: