background image

9

Care and Maintenance

ˆ

Care and Maintenance

Your RadioShack Stereo Sound Mixer is an example of superior design and crafts-
manship. The following suggestions will help you care for your mixer so you can en-
joy it for years.

Keep the mixer dry. If it gets wet, wipe it dry immediately. Liquids might
contain minerals that can corrode the electronic circuits.

Use and store the mixer only in normal temperature environments. Tem-
perature extremes can shorten the life of electronic devices and distort or
melt plastic parts.

Keep the mixer away from dust and dirt, which can cause premature wear
of parts.

Handle the mixer gently and carefully. Dropping it can damage circuit
boards and cases and can cause the mixer to work improperly.

Wipe the mixer with a damp cloth occasionally to keep it looking new. Do
not use harsh chemicals, cleaning solvents, or strong detergents to clean
the mixer.

Modifying or tampering with the mixer’s internal components can cause a malfunction
and might invalidate its warranty. If your mixer is not performing as it should, take it to
your local RadioShack store for assistance.

32-1214.fm  Page 9  Friday, March 10, 2000  1:39 PM

Summary of Contents for SSM-60













Reviews: