20
3. Press
UP
or
DWN
until the desired channel appears on the
display. As you receive signals, the signal meter on the dis-
play shows the incoming signal strength.
Important! Channel 9 is reserved for motorist assistance
and for reporting emergency information about accidents,
hazardous road conditions, and so on. Always give emer-
gency messages priority on Channel 9.
4. Adjust
SQUELCH
to cut out background noise between
transmissions. To do this, wait until there is no signal on the
channel. Then slowly turn
SQUELCH
clockwise until the
background noise stops.
Note: Do not turn
SQUELCH
too far clockwise because you
might cut out weak signals, too.
5. Adjust
VOLUME
to a comfortable listening level.
6. To turn off the walkie-talkie, turn
VOLUME
counterclockwise
until you hear it click.
21-1672.fm Page 20 Thursday, August 5, 1999 12:04 PM
