6. Motion Detected Alert
The Master Controller will receive an alert (call or SMS) once the device
detects vibration indicating possible motion.
6.1 Vibration sensitivity:
The device you have purchased is equipped with a sensitive Vibration
detection system. The motion sensor sensitivity rate can be set by SMS
command.
SMS:
*sensitive*1-5*
(where X = 1-5, 1 being the most sensitive, 5 the
least, default setting is 1)
1=3 seconds continued vibrating
2= 6 seconds continued vibrating
3= 9 seconds continued vibrating
4=12 seconds continued vibrating
5=15 seconds continued vibrating
Device Response:
“
Notice
: Vibration sensitivity is set to 1-5.”
6.2 SMS or CALL Alert Settings:
With the vibration detection system. There will be a Call alert (call master
number 2 times) or a SMS alert generated and send to master number, when
any motion is detected after 3 minutes of non-movement.
The system
default setting is call alert, and can be turned off by SMS command
SMS:
*alertoff*
Device Response:
“Notice: System has ended alert function.”
SMS:
*smsalert*
Device Response:
“Notice: System has entered SMS alert function.”
S
M
S:
*callalert*
Device Response:
“Notice: System has entered call alert function.”
6.3 Period Motion Alert
System will enable motion alert function at appointed periods, up to 3 time
periods. Time format need to be in military time and can be set to hour. e.g.
0811
，
1418 refers to 8:00
-
11:00,14:00
-
18:00 of the day.
SMS
：
*continuousalert*0-23*0-23*
Device Response:
“Notice: System has enabled period alert function at
appointed time period.”
SMS
：
*continuousalertoff*
Device Response:
“Notice: System has ended period alert function.”
Радиотерминал
121059, Москва, 1-й Можайский тупик, д. 8а, стр. 1, этаж 2 тел. : +7 (499) 641-0464 +7 (
812
)
600
-
6040
www.radioterminal.ru info@radioterminal.ru
