17
Chapter 4 – Computer Programming
Appendix A- Troubleshooting
Symptom
Possible
Solution
The radio
doesn't start
The battery dies
quickly
The LED indicates
reception, but the
speaker is silent.
Others can’t hear
my transmission.
The radio transmits
without touching the
PTT.
The battery is too low.
The battery isn't correctly
installed.
The battery is dead.
The battery isn't fully
charged
.
Volume is too low.
CTCSS or DCS enabled.
Their CTCSS or DCS
settings don’t match yours.
You're too far apart.
The VOX is enabled.
VOX sensitivity is too high.
Change or recharge the battery.
Remove the battery and reinstall it.
Purchase a new battery.
Recharge the battery.
Turn up the volume.
Change your CTCSS or DCS to
match those you're trying to
communicate with.
Turn CTCSS or DCS off.
Change your CTCSS or DCS
Settings to match your peers.
Move in closer.
Turn VOX off.
Turn down VOX sensitivity.
18
Appendix B- Technical specifications
General
General specifications
Specification
Model FS-T3/PR-T3
Frequency range (MHz) US: FRS; EU: PMR
Memory channels 16
Frequency stability 2. 5ppm
Antenna impedance 50 Ohm
Operating temperature -10
O
C to + 50
O
C
Mode of operation same frequency simplex
Dimensions (mm) 2.8" x 1.4" x 6.0" (7.0 x 15.3 x 3.5 cm)
Weight (g) 117g
If you need to program the radio via computer, download programming software at
https://www.radioddity.com/support/.
