11
4.3 Status Indications
The status LED has a very simple and tradi
�
onal design. When you receive a signal it turns green, when you transmit it turns
red, and it's o
ff
in standby.
LED Indicator
Radio Status
Constant Red
Transmi
�
ng.
Constant Green
Receiving.
4.4 Main keypad controls
•
[F/SOS] key:
Press it for a short
�
me to turn on the FM radio. Press it again to turn it o
ff
.
If you press it for a long
�
me you will ac
�
vate the alarm func
�
on. Press it again to turn o
ff
this feature.
•
[M/LAMP] key:
Press it for a short
�
me to light up the
fl
ashlight. If you push this bu
�
on again, the
fl
ashlight will light up to
strobe mode. Press [MONI] a third
�
me to turn o
ff
the
fl
ashlight.
To ac
�
vate the Monitor func
�
on presses the bu
�
on for a long
�
me.
•
[MENU]
key: It is used for ac
�
va
�
ng the MENU, choose each MENU selec
�
on and con
fi
rm the parameter.
The radio turns o
ff
, press and hold the [MENU] key to turn on the radio to switches between Frequency (VFO) mode and
Memory (MR) mode.
Memory mode is some
ti
mes also referred to as Channel mode.
To save frequencies to channel memory you must be in Frequency (VFO) mode.
•
[
▲
]
key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press
[
▲
]
to move the scanning upwards.
•
[
▼
]
key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN
mode, press this control to move the scanning downwards.
•
[EXIT/AB]
key: push this bu
�
on to exit the func
�
ons and se
�
ngs.
Press it for switches between A (upper) and B (lower) displays. The frequency or channel on the selected display becomes
the ac
�
ve listening and transmit frequency or channel.
To save frequencies to channel memory you must be on the A display.
When listening to broadcast FM, the
[EXIT/AB]
key switches between 65-75 MHz and 76-108 MHz band
