14
b.
Press
[EXIT/AB]
un
�
l the
icon appears next to the upper display.
c.
Enter
[4][3][2][6][1][2][5]
on the numeric keypad.
WARNING!
Just because you can program in a channel does not mean you're automa
ti
cally authorized to use that
frequency. You may be tempted to use PMR446, FRS, GMRS and MURS (in USA) frequencies. Do note however
that there are restric
ti
ons on these bands that make this transceiver illegal for use. Contact your local
regulatory body for further informa
ti
on on what laws, rules and regula
ti
ons apply to your area.
5.6 Channel (MR) mode
The use of Channel (MR) mode is dependent on actually having programmed in some channels to use.
Once you have channels programmed and ready, you can use the
▲
and
▼
keys to navigate between channels.
Note:
If you have channels programmed with Transmit power set to Low, you can use the
[# ]
key to
momentarily switch over to mid or high power if you're having trouble getting through.
Chapter6. Advanced Features
6.1 Frequency scanning
This func
�
on can scan the frequency.
a.
In frequency mode, press
[*/scan]
key for more than 2 seconds. The radio will start scanning the frequency according to
the set frequency step.
b.
You can change the scanning direc
�
on with the
▲
and
▼
keys.
c.
Press any key to stop the scanning.
Note: for Scan mode, see Menu No.18.
6.2 Channel scanning
This func
�
on can scan the channels.
a.
In channels mode, press
[*scan]
key for more than 2 seconds. The radio will start scanning according to the channel you
set.
