17
5. Press the [EXIT/AB] key to exit the menu.
If you want to momentarily override the lock without having to se
tti
ng the menu op
ti
on to OFF, you can do so by pressing
the [EXIT/AB] key an instant before pressing the PTT.
Another op
ti
on is to disable menu [7] (TDR) to override the lock. Then re-enable TDR when you want the lock resumed
6.5 Cursor
▼▲
Conversion (A/B)
Directly press
[EXIT/AB]
key to move the cursor up and down. Then, you can modify or con
fi
rm the parameters indicated by
the cursor.
Important1:
GT-82
has a dual-frequency display func
�
on. In frequency mode, you will see on the display two di
ff
erent
receiving
and
transmi
�
ng
frequencies;
while
in
channel
mode
the
two
di
ff
erent
channels
will
be
displayed.
Important2:
In frequency or channel mode, press the
[EXIT/AB]
key to shi
�
between the main channel A and the
sub-channel B
▲
on the display indicates on which channel (main channel A or sub channel B) you are opera
�
ng.
▼
is displayed next to the channel.
6.6 High/low power fast selection
In channel mode, press
[#
]
key to shi
�
between high and low power.
6.7 Keypad lock
This func
�
on locks the keypad to prevent accidental pressure of the controls.
To unlock the keypad, press
[#
]
for more than 2 seconds.
6.8 FM Radio (FM)
The frequency ranges to listen to the radio is 65-108MHz. When listening to broadcast FM, press
[EXIT/AB]
key switches
between 65-75 MHz and 76-108 MHz band.
a. In frequency or channel mode, Press
[F/SOS]
to turn on the radio.
b. Select the desired radio frequency with the
▲
or
▼
keys or input the frequency. or
•
Press [
* SCAN
] to automa
�
cally search a radio sta
�
on.
