29
Watch mode
B band transmit (Bottom row frequency)
*When enabled, priority is returned to selected display once the
signal in the other display disappears.
35
STE - Squelch Tail
Elimination
MENU+35
ON
OFF
*This function is used eliminate squelch tail noise between
Radioddity
handhelds that are communicating directly (no
repeater
).
Reception
of
a
55
Hz
or
134.4
Hz
tone
burst
mutes
the
audio
long
enough to prevent hearing any squelch tail noise.
36
RP-STE-Squelch Tail
Elimination
MENU+36
OFF/ 1,2,3…10
*This function is used eliminate squelch tail noise when
communicating through a repeater.
37
RPT-RL - Delay the
squelch tail of
repeater
MENU+37
OFF/ 1,2,3…10
*Delay the Tail Tone of Repeater (X100 milliseconds)
38
PONMSG-Power On
Message
MENU+38
FULL: Performs an LCD screen test at power-on
MSG: Displays a 2-line power on message
*Controls the behavior of the display when the transceiver is turned
on.
39
ROGER - Roger Beep
MENU+39
OFF
ON
*Sends an end-of-transmission tone to indicate to other stations that
the transmission has ended.
40
RESET – Restore
defaults
MENU+40
VFO: Menu initialization
ALL: Menu and channel initialization
*Resets the radio to factory defaults, with some exceptions.
41
R-TONE-
Repeater Tone
MENU+41
The R-TONE frequency is transmitted by Pressing the [F] side key while
the [PTT] key is also pressed.
A common tone burst frequency used by many amateur radio systems in
Europe is 1750Hz
