63
Mixes:
•
Linear Programmable mixes
(
PROG.MIX1-4
): fully assignable programmable mixes with a linear response.
•
Curved Programmable mixes
(
PROG.MIX5-8
): fully assignable programmable mixes with a curved response.
•
ELEV-FLAP
SUHSURJUDPPHGPL[FUHDWHVHOHYDWRUPRYHPHQWIURPWKHLQERDUGÀDSVDVZHOODVHOHYDWRUV
•
BUTTERFLY
: Often called crow,
BUTTERFLY
is the glider version of
AIRBRAKE
. (
BUTTERFLY
does not have the option to
activate it solely from a switch, and its activation switch. It always provides progressively more
BUTTERFLY
as the
CHANNEL 3
(
THROTTLE
)
STICK
is lowered, or raised if used
THR-REV
) See
AIRBRAKE
.
Full Span Mixing: Flap-to-Aileron and Aileron-to-Flap
•
CAMBER-MIX
AILE-FLAP
7KLV SUHSURJUDPPHG PL[ LV XVHG WR FUHDWH IXOO VSDQ ÀDSDLOHURQ DFWLRQ RQ D JOLGHU ZLWK
ZLQJVHUYRV7KLVFKDQJHVWKHFDPEHURYHUWKHHQWLUHZLQJZKLFKSURGXFHVOHVVGUDJWKDQMXVWGURSSLQJWKHÀDSVE\
themselves.
NOTE: When you have
ELEV-FLAP
mixing also, the trailing edge droops with the elevators, increasing pitch response.
AILE
RUDD
(
GLID
):
Adjustability:
•
RATE
range of -100 to +100. Negative setting would result in opposite rudder (aileron) action from aileron (rudder).
•
SWITCH A-H
fully assignable. Also
LOGIC SW
(
Lsw1 to 3
) may be assigned. Set up
LOGIC SW
: See p. 26.
•
POSITION
fully assignable, including
NULL
(mix always on) and
Up&Cntr
and
Cntr&Dn
to activate the mix in 2 separate
positions of the same
SWITCH
.
•
Condition
: The separate
AILE
RUDD
VHWWLQJVIRUHDFKÀLJKWFRQGLWLRQFDQEHVHW
You can select a pre-programed mix which is used to mix the rudders with
aileron operation or the ailerons with rudder operation.
Aileron-to-rudder mix (
AILE
ĺ
RUDD
): automatically creates a "coordinated turn".
Rudder -to-aileron mix (
RUDD
ĺ
AILE
): used to counterract undesirable roll (roll
coupling) that happens with rudder input, especially in knife-edge.
GOAL of EXAMPLE:
STEPS:
INPUTS:
([ 58''ĺ$,/( QR VZLWFK
corrects roll coupling.
Open
AILE
RUDD
mix submenu.
for 1 second.
(If
BASIC
,
again.)
C
to
AILE
RUDD
.
Select the mixing mode.
C
to
MODE
.
to
RUDD
ĺ
AILE
Activate the function.
C
to
MIX
to
ON
.
Set the rate. (Ex:
100%
each way)
C
to
FLP1
.
RUDDER STICK
.
to
+25%
.
RUDDER STICK
.
to
+25%
.
Repeat as needed.
Close.
Where next?
ELEV-FLAP
mixing. See p. 48.
BUTTERFLY
. See p. 48.
Use a mix to
OFFSET
WKHÀDSVDVHWGLVWDQFHRQDVSHFL¿HGVZLWFKVHHS
View additional model setups on the internet: www.radiolink.com.cn/doce.
