20
Mode 3
Left
hand,
left and
right
Left
hand, up
and
down
Right
hand,
up and
down
Right
hand,
left and
right
Mode 4
Left
hand,
left and
right
Right
hand, up
and
down
Left
hand,
up and
down
Right
hand,
left and
right
-custo
mized
The default action is the same with
Mode 1. Please note that the stick of
channel 1 to 4 cannot be changed in
model 1 to 4. But in the customized
model, you can change the control
switch of STK1/2/3/4 to other switch
such as SWA/VRA. If you want to
change it, make sure to disconnect
power supply to avoid safety accident.
LockScreen: It can be set to OFF or “1s-254s”, When it is set to “1s-254s”, the screen will be locked if there is
no operation in this time period. The setting is to avoid wrong operation during flight. Long press push button
for 1 second to unlock the screen.
Sound: When it is on, there is sound when setting the function or alarming. When it is off, there is no sound.
2.2 Model Select
Model submenu: includes three function that manage model
memory: MODEL SELECT,MODELCOPY and MODEL NAME.
Since these functions are related, and all basic features are used
with most models, they are together in the Model submenu.
Totally there are 15 models stored in the system, followed by model
name and plane type to use on tap, thus you don’t need to set
every time for different plane. MODEL NAME, MODEL TYPE and
transmitter voltage. Make sure that MODEL TYPE is accomplished
with your plane type before flight. Or it will cause error in servo and rudder.
Select
Press Push button to choose the model you want. Long press push button to confirm and press End
button to come back to the menu.
Caution: Do not switch the model when the model is powered on. Disconnect power supply of the model when
switching model. After selecting model, enter the basic menu-Reverse. Set the throttle to reverse.
COPY
Save the present data as another model type, it will be displayed by shadow area to differ from. When this
copy start, the object data will be fully covered including name, type and module type, and cannot recover.
Caution: when you save the present model type as another, all related data will be copied including the
original model name. Accordingly, if you want to change the model type, the whole data need to reset, also for
model name. The first thing to copy is to change the model type or delete the original name and rename a
new model to avoid confusion.
Model Name
This is used to set the present model name. Name all model to identify each other, and fast select the
