深圳市乐迪电子有限公司
75
governor settings.
Ex: select switch that
selects theconditions.
Adjust governor speed
settings perswitch position
or condition as needed.
(Ex: defaults are fine.)
Allows head speed
adjustment from transmitter.
to each Cond position
or
as
needed.
to next Cond
，
repeat .
Close
3.3.11 Throttle Mixing (THROTTLE MIX)
This function can be set for each flight condition, and is used
to correct the tendency of the model to change altitude when
the rotor is tilted by aileron, elevator, and rudder controls.
Adjustability:
• Mixing may be set from 0 to 100% each flight condition.
3.3.12 SWASH-RING
This function is to limit movement of swash plate to avoid damage to the SWASH ROB during operation
aileron and ELEVATOR. It is affected in 3D flight. Movement of AILERON and ELEV is limited in the circle.
Adjustability:
Goals
Steps
Inputs
Correct the
tendency of the
model to change
altitude.
Open THRO- MIX function.
to BASIC menu,
again to ADVANCE
to THRO-MIX
Activate the function.
to MIX
，
to ON
Adjust the rate.
Ex: IDL1 (AIL to TH) 10%
to IDL1 (AIL→TH)
，
to 10%,
Repeat as needed.
Close
