Radiolink Electronic Ltd
Radiolink Electronic Ltd
Parameters
Size：35.5*15.5*10.5mm (1.4"*0.61"*0.41")
Weight(With wires)：4.5g（0.16oz）
Channel Quantity：3
Integrated Sensor：three-axis gyroscope and three-axis acceleration sensor
Signal Supported：SBUS/PPM
Input Voltage：5-6V
Operating Current：25±2mA
Installation
Make sure the servo phase adjustment button on Byme-D points to the aircraft head,
and the pin end of Byme-D points to the tail of the aircraft. The flight controller can be
installed either face up or down with 3M glue on the aircraft body and the wires connect
to the corresponding pins. It is recommended to install Byme-D near the center of
gravity (of the aircraft). Please install Byme-D as shown below. (Note: Wrong installation
direction and position of Byme-D will lead to inaccurate correction of the flight
controller, and it is difficult to achieve the best flight effect).
