Radiolink Electronic Ltd
Radiolink Electronic Ltd
Transmitter Setup
1. Channel 5 (three-way switch) is used to switch among 3 flight modes, and channel 7 is
used to lock/unlock the motor. Therefore, only transmitter with 7 channels or more is
available.
2. You cannot set any mixing function in the transmitter when Byme-D is mounted on
the aircraft. Because there is already the mixing function in Byme-D. The mix control will
automatically take effects according to the flight mode of the aircraft. If the mixing
function is set in the transmitter, there will be conflicts of mixing function and then affect
the flight.
3. Set the direction of the channel as below:
CH3 - Throttle: Reversed
Other channels: Normal
