Radiolink Electronic Ltd
Radiolink Electronic Ltd
Power-On Calibration
When the aircraft is powered on, the gyro on Byme-D will calibrate with the green led
flashing. Please keep the aircraft remain still until the green light is always on.
Attitude Calibration
The flight controller needs to calibrate the attitudes/level to ensure the balanced status.
It is advised to lift the model head with a certain angle to ensure the calibration accuracy.
Push the left stick (left and down) and the right stick (right and down) as below and hold
more than 3 seconds. The green led flashes once mean the calibration completed.
Note: If you set the direction of the channel as above(CH3 - Throttle: Reversed, Other
channels: Normal), but the attitude calibration cannot be finished by pushing the left
stick (left and down) and the right stick (right and down), please enter the menu of the
transmitter to set the direction of the channel. The direction of the throttle channel still
remains reversed. But for other channels, please try the following 3 combinations to set
the channel direction and then calibrate the attitude by pushing the left stick (left and
down) and the right stick (right and down):
